Cisco Cisco ONS 15454 M12 Multiservice Transport Platform (MSTP) Mode D'Emploi
6
PCTC Operation, Information, and Shortcuts
OL-25021-01
ONS 15454 Connections
ONS 15454 Connections
You can connect to the ONS 15454, 15454-M2, or 15454-M6 shelf assemblies in multiple ways.
(ONS 15454) You can connect your PC directly to the ONS 15454 shelf using the RJ-45(LAN) port on
the faceplate of TCC2/TCC2P/TCC3 card or using the backplane RJ-45 LAN port.
the faceplate of TCC2/TCC2P/TCC3 card or using the backplane RJ-45 LAN port.
(ONS 15454 M6) You can connect your PC directly to the ONS 15454 M6 shelf using the RJ-45(LAN)
port on the faceplate of TNC/TNCE/TSC/TSCE card or using the EMS RJ-45 port or using the RJ-45
Craft port. The EMS RJ-45 port and RJ-45 Craft port are present on the external connection unit (ECU).
port on the faceplate of TNC/TNCE/TSC/TSCE card or using the EMS RJ-45 port or using the RJ-45
Craft port. The EMS RJ-45 port and RJ-45 Craft port are present on the external connection unit (ECU).
(ONS 15454 M2) You can connect your PC directly to the ONS 15454 M2 shelf using the RJ-45(LAN)
port on the faceplate of TNC/TNCE/TSC/TSCE card or using the EMS RJ-45 port on the power module.
port on the faceplate of TNC/TNCE/TSC/TSCE card or using the EMS RJ-45 port on the power module.
For the ANSI shelf, you can connect using the LAN pins on the backplane (the ETSI shelf provides a
LAN connection through the RJ-45 jack on the MIC-T/C/P Front Mount Electrical Connection
[FMEC]). Alternatively, you can connect your PC to a hub or switch that is connected to the ONS 15454,
connect to the ONS 15454 through a LAN or modem, or establish TL1 connections from a PC or TL1
terminal.
LAN connection through the RJ-45 jack on the MIC-T/C/P Front Mount Electrical Connection
[FMEC]). Alternatively, you can connect your PC to a hub or switch that is connected to the ONS 15454,
connect to the ONS 15454 through a LAN or modem, or establish TL1 connections from a PC or TL1
terminal.
lists the connection methods and requirements for ONS 15454, 15454-M2, or
15454-M6 shelves.
Note
The TNC/TNCE/TSC/TSCE card supports multi-shelf connections through three FE RJ45 connections
on the ECU. The TNC and TNCE cards support one GE connection for CRS-1 router through the SFP
port on the card. This SFP port can act as a secondary OSC supporting only FE and GE interfaces.
The TNC/TNCE/TSC/TSCE card in ONS 15454 M6 shelf can connect to CTC through the EMS RJ-45
port or Craft port on the ECU. The TNC/TNCE/TSC/TSCE card in ONS 15454 M2 shelf can connect to
CTC through the EMS RJ-45 port on the power module.
on the ECU. The TNC and TNCE cards support one GE connection for CRS-1 router through the SFP
port on the card. This SFP port can act as a secondary OSC supporting only FE and GE interfaces.
The TNC/TNCE/TSC/TSCE card in ONS 15454 M6 shelf can connect to CTC through the EMS RJ-45
port or Craft port on the ECU. The TNC/TNCE/TSC/TSCE card in ONS 15454 M2 shelf can connect to
CTC through the EMS RJ-45 port on the power module.
Web browser
•
PC: Internet Explorer 6.x, 7.x, 8.x
•
UNIX Workstation: Mozilla 1.7
•
Mac OS-X PC: Safari
For the PC, use JRE 1.6 with any
supported web browser.
supported web browser.
The supported browser can be
downloaded from the Web.
downloaded from the Web.
Cable
User-supplied CAT-5 straight-through cable
with RJ-45 connectors on each end to
connect the computer to ONS 15454,
15454-M2, or 15454-M6 directly or through
a LAN.
with RJ-45 connectors on each end to
connect the computer to ONS 15454,
15454-M2, or 15454-M6 directly or through
a LAN.
User-supplied cross-over CAT-5 cable to the
DCN port on the ONS 15454 patch panel or
to the Catalyst 2950 (multishelf mode).
DCN port on the ONS 15454 patch panel or
to the Catalyst 2950 (multishelf mode).
—
Table 2
Computer Requirements for CTC (continued)
Area
Requirements
Notes