Cisco Cisco Prime Central 1.5.2 Guide De Montage
Integrating the Prime Network Integration Layer with Prime Central
Procedure
Step 1
As the Prime Network user, log in to the Prime Network gateway:
ssh root@Prime-Network-host-IP-address
ssh root@Prime-Network-host-IP-address
su - prime
In this example, prime is the Prime Network
user.
user.
Note
Step 2
Disable the Prime Network integration layer health checker by entering the following command on the Prime Network
gateway server:
$PRIMEHOME/local/scripts/il-watch-dog.sh disable
gateway server:
$PRIMEHOME/local/scripts/il-watch-dog.sh disable
Step 3
Stop the Prime Network integration layer:
$PRIMEHOME/bin/itgctl stop
$PRIMEHOME/bin/itgctl stop
Step 4
Change directories to the $PRIMEHOME/integration directory:
cd $PRIMEHOME/integration
cd $PRIMEHOME/integration
Step 5
Verify that the correct value is configured for the HOSTNAME object in the ILIntegrator.prop file.
a) Enter the following command:
hostname – –fqdn
b) On the primary Prime Network server, navigate to the $PRIME_NETWORK_HOME/prime_integrator directory.
c) Open the ILIntegrator.prop file and confirm that the value configured for the HOSTNAME object is the same as the
c) Open the ILIntegrator.prop file and confirm that the value configured for the HOSTNAME object is the same as the
gateway listed after running the hostname – –fqdn command.
Only complete this step if Prime Network is installed in a local and Geographical redundancy configuration.
Otherwise, proceed to Step 6.
Otherwise, proceed to Step 6.
Note
Step 6
Run the DMIntegrator script. (For usage details, see
./DMIntegrator.sh -a ILIntegrator.prop Prime-Central-DB-hostname db-SID db-user db-password port
Step 7
Reload the user profile:
source $HOME/.cshrc
source $HOME/.cshrc
Step 8
Enable the Prime Network integration layer health checker by entering the following command on the Prime Network
gateway server:
$PRIMEHOME/local/scripts/il-watch-dog.sh enable
gateway server:
$PRIMEHOME/local/scripts/il-watch-dog.sh enable
Step 9
Start the Prime Network integration layer:
$PRIMEHOME/bin/itgctl start
$PRIMEHOME/bin/itgctl start
Step 10
Restart Prime Central integration layer by running below: In Prime Central, login as primeusr and restart the Prime Central
integration layer to recognize the recently added Prime Network server:
itgctl stop
integration layer to recognize the recently added Prime Network server:
itgctl stop
itgctl start
The Prime Network integration layer will remain in Unknown state (even after integration), if the Prime Central
integration layer is not restarted.
integration layer is not restarted.
Note
59