Cisco PowerKEY CableCARD Module 805 Mode D'Emploi
Chapter 1 Set Up the PowerKEY CableCARD or M-Card Module
10
78-4011765-01 Rev C
3 Are the mmi.txt and gfc.txt links present as valid links?
If yes, go to Configuring the CableCARD Server on the DNCS (on page 12).
If no, delete any invalid mmi.txt and gfc.txt links (orange link icon), if they
exist, and then go to step 4.
Note: Valid links are indicated with a gray icon.
4 Select the POD_Data server, click File, and then select New Link. A window
similar to the following window opens.
5 Type mmi.txt in the Link Name text box.
6 Ensure that POD_CHANNELS appears in the Source Name field. If it does not
6 Ensure that POD_CHANNELS appears in the Source Name field. If it does not
appear in this field, select it from the Source Name list.
7 Click Select adjacent to the Linked Path field to locate and select the mmi.txt file
created in the procedure Creating the mmi.txt File (on page 8).
8 Click Save to add an mmi.txt link to the POD_Data BFS server.
9 Repeat steps 4 through 8 to add the gfc.txt file to the POD_Data BFS server.
9 Repeat steps 4 through 8 to add the gfc.txt file to the POD_Data BFS server.