Cisco PowerKEY CableCARD Module
4
4002025 Rev G
Site Requirements
TIPS:
When installing the PowerKEY CableCARD software on the DNCS, look for the
SAIcblcrd (CableCARD) package instead of the SARA ResApp package as
indicated in Chapter 2 of Downloading New Client Application Platform Software
Installation Instructions.
SAIcblcrd (CableCARD) package instead of the SARA ResApp package as
indicated in Chapter 2 of Downloading New Client Application Platform Software
Installation Instructions.
The file you will adding is going to be in the /dvs/cablecard/directory. The file
you should install is pdl_v149a.rom. There is a second file in the directory called
pdl_149b.rom. This file is provided for sites (labs) that need to test switching
between versions of CableCARD module code. These files are the same with the
exception of the version labeling.
you should install is pdl_v149a.rom. There is a second file in the directory called
pdl_149b.rom. This file is provided for sites (labs) that need to test switching
between versions of CableCARD module code. These files are the same with the
exception of the version labeling.
Diagnostic Display
After loading CableCARD module software release 1.49p2 onto the CableCARD
module, the CableCARD module diagnostic screen on the TV will show the version
as OS Build: 2.3.149.3 Wed May 10 2006. This is the value your installers and staging
area personnel should look for in order to confirm that the CableCARD module has
downloaded the correct software.
module, the CableCARD module diagnostic screen on the TV will show the version
as OS Build: 2.3.149.3 Wed May 10 2006. This is the value your installers and staging
area personnel should look for in order to confirm that the CableCARD module has
downloaded the correct software.