Cisco Cisco D9804 Multiple Transport Receiver Guide De Montage
Configuring the Setup Information
78-4042990-01 Rev B
113
Remuxltiplexing
If you selected Remux as the output stream Format, the following deterministic
multiplexing configuration appears on the right:
multiplexing configuration appears on the right:
1 Enter the combined transport ID (Com CTID) for the common stream, in the
range from 1 to 65535.
2 Select the Com CT Name.
This displays the name of the selected common stream. If the MTR has received
inband data, a scrolling list of available transports is available.
inband data, a scrolling list of available transports is available.
3 Enter the common combined transport PID (Com CTPID) for the common
stream, in the range from 1 to 8192.
4 Set the session word index for the common combined transport stream (Com CT
SW Idx) if the common stream is scrambled, in the range from 1 to 512.
5 Enter the combined transport ID (Reg CTID) for the regional stream, in the
range from 1 to 65535.
6 Select the Reg CT Name.
This displays the name of the selected regional stream, provided by the uplink. If
the MTR has received inband data, a scrolling list of available transports is
available.
the MTR has received inband data, a scrolling list of available transports is
available.
7 Enter the combined transport PID for the regional stream (Reg CTPID), in the
range from 1 to 8192.
8 Set the session word index for the regional combined transport stream if the
regional stream is scrambled (Reg CT Sw Idx), in the range from 1 to 512.
9 The remaining field descriptions are the same as the decombined format. For
more information, see Setting up the ASI Output Parameters (on page 111).