Cisco Cisco D9887B HDTV Modular Receiver Guide De Montage
MPEG-2/MPEG-4 4:2:0 Decoder (1 Video, 2 Audio) Option
4043118 Rev A
183
The following are set for each Mode:
Mode
Compression
Downmix
Dynamic Range
User
Custom 1
2/0 LR
Disabled
Monitor
Line Mode
2/0 LR
Enabled
Transmission
RF Mode
2/0 LtRt
Disabled
Each Mode allows the following to be changed:
User: Compression, Downmix, Dynamic Range
Monitor: Compression
Transmission: no changes
Compression
1 Use the Up and Down buttons to move the cursor to "Compress," then press the
1 Use the Up and Down buttons to move the cursor to "Compress," then press the
Enter button.
2 Use the Up and Down buttons to select the desired compression ("RF Mode",
"Line Mode", "Custom 0", "Custom 1"), then press the Enter button to save the
selection.
selection.
Downmix
1 Use the Up and Down buttons to move the cursor to "Ch Downmix," then press
1 Use the Up and Down buttons to move the cursor to "Ch Downmix," then press
the Enter button.
2 Use the Up and Down buttons to select the desired downmix ("2/0 LR", "2/0
Auto", "2/0 LtRt", "MonoChan1", "MonoChan2"), then press the Enter button to
save the selection.
Note: The "2/0 Auto" is used by Dolby Digital Plus (EAC3) to use "2/0 LR" or
"2/0 LtRt" based on the received audio metadata. If the metadata is not present,
like for Dolby Digital (AC3), "2/0 LtRt" is used.
save the selection.
Note: The "2/0 Auto" is used by Dolby Digital Plus (EAC3) to use "2/0 LR" or
"2/0 LtRt" based on the received audio metadata. If the metadata is not present,
like for Dolby Digital (AC3), "2/0 LtRt" is used.