Cisco Cisco Content Acquirer Application

CSCtf24840

Symptom:

TRACE command is exposed and can be used to get more details of the server.

Condition:

Use of TRACE command to the SE.

CSCsz23407

Symptom:

Minor alarm is generated in the SE stating that the fmsadmin process is down. Syslog reports the 
following:

"%SE-UNKNOWN-3-899999: Failed to create listener for adaptor, IP 127.0.0.1, port 

11110: TCCommBridge::createListener 127.0.0.1:11110/v4: bind failed!!!." 

The show statistics flash-media-streaming command does not work. 

Condition:

This issue happens randomly once Flash Media Streaming is restarted or the SE is restarted. This 
issue happens because the fmsadmin process port was taken by some other process.

The only supported upgrade paths are Release 2.4.x to Release 2.5.7, and Release 2.5.x to Release 2.5.7. 
If you are running a release prior to Release 2.4.x, you must upgrade to at least Release 2.4.x before 
upgrading to Release 2.5.7.

After the upgrade procedure starts, do not make any configuration changes until all the devices have been 
upgraded. 

Upgrading to Release 2.5.7 includes SHA-256-encrypted user passwords. If the config file contains 
users with SHA-256 encrypted passwords, and if you downgrade to an earlier release, the user 
information will be lost because the older software cannot recognize the new method of encrypting 
passwords.

When upgrading to Release 2.5.7 from Release 2.4.x, configuring the Proximity Server port number field 
is no longer required for the Proximity-Based Routing feature. The port number for all Proximity servers 
is 7003.

Release 2.5.7 only supports one IGP (IS-IS or OSPF) for the Proximity Engine. When upgrading to 
Release 2.5.7 from Release 2.5.1 or Release 2.5.3, if both IGPs (IS-IS and OSPF) were configured for 
the Proximity Engine, then one of the configurations must be removed.