Cisco Cisco Content Delivery Engine 250 Guide De Montage
+3.3Vsb Voltage 3.65 2.95 3.24
VBAT Voltage 3.65 2.95 2.86 Warning!
CPU1 Temperature 95/203 Low
CPU2 Temperature 95/203 Low
System Temperature 75/167 30/86
Power1 Temperature 75/167 34/93
Chassis Intrusion Good
Power Supply Failure Good
Power1 Supply Failure Good
Power2 Supply Failure Bad Warning!
--------------------------------------------- Thu Jan 17 06:37 :09 2013
Power1 Information: Type = AC Power, Firmware Rev = 6.0
Power2 Information: Type = Unknown
VBAT Voltage 3.65 2.95 2.86 Warning!
CPU1 Temperature 95/203 Low
CPU2 Temperature 95/203 Low
System Temperature 75/167 30/86
Power1 Temperature 75/167 34/93
Chassis Intrusion Good
Power Supply Failure Good
Power1 Supply Failure Good
Power2 Supply Failure Bad Warning!
--------------------------------------------- Thu Jan 17 06:37 :09 2013
Power1 Information: Type = AC Power, Firmware Rev = 6.0
Power2 Information: Type = Unknown
IPMI Information: Firmware Rev = 2.5
2.1.4 Validation on VDS-IS (Pre-Release 3.2)
For systems running VDS-IS software prior to Release 3.2, the following signed script should be
executed to verify the IPMI firmware version.
executed to verify the IPMI firmware version.
The download location for this file is referenced
in the Field Notice.
#script execute showipmifw.sh.signed
IPMI Firmware Revision 2.5
IPMI Firmware Revision 2.5
Script showipmifw.sh.signed exited with return code 0
In addition, please issue a “show tech” CLI command. As stated earlier, if the command
does not hang at the “system health” section (output from sdt), then the system booted
cleanly and should be free of any subsequent IPMI Watchdog issues.
2.1.5 Validation on VQE
Verify the IPMI FW using the following command at the console:
root@]# ipmiutil sel show
This command should return the following value for the “BMC version”
ipmiutil ver 2.51
showsel: version 2.51
-- BMC version 2.5 , IPMI version 2.0
SEL Ver 51 Support 3, Used = 1 records, Free space = 574 records
RecId Date/Time_______ Source_ Evt_Type SensNum Evt_detail - Trig [Evt_data]
0001 04/19/13 02:58:43 BMC 08 Power Supply #1a is OK ef [01 ff ff]
showsel completed successfully
showsel: version 2.51
-- BMC version 2.5 , IPMI version 2.0
SEL Ver 51 Support 3, Used = 1 records, Free space = 574 records
RecId Date/Time_______ Source_ Evt_Type SensNum Evt_detail - Trig [Evt_data]
0001 04/19/13 02:58:43 BMC 08 Power Supply #1a is OK ef [01 ff ff]
showsel completed successfully
Note: Linux will usually strip the “0” from the 2.05 string.