Cisco GainMaker Reverse Segmentable Node - 1GHz with 40 52 MHz Split
Using CheetahNet with a GainMaker
Node HMS Status Monitor Module
Application Note
Node HMS Status Monitor Module
Application Note
Overview
CheetahNet is generally supported by the GainMaker® node Hybrid
Management System (HMS) status monitor module. However, the following
considerations apply when using CheetahNet with the HMS status monitor
module.
CheetahNet does not currently ship with a default profile for the HMS status
monitor module. When installing a new HMS status monitor, you must
manually create and download alarm profiles before placing the device in
service. Otherwise, some monitored parameters that are in the normal range
may appear to be in alarm.
Certain CheetahNet control functions are disabled or modified when used
with GainMaker nodes.
This application note describes procedures for creating and downloading alarm
profiles for GainMaker node products. It also identifies CheetahNet controls that
are disabled or modified when using GainMaker nodes, and explains how to
confirm the current state of these controls.
Scope
Except where noted, this application note applies to HMS status monitor modules
installed in all compatible GainMaker node products.