Cisco Headend Digital Broadband Delivery System
Allow HTTP Access to the Web Services
4034689 Rev A
63
6 Follow these instructions to restart the DNCS http process.
a Type the following command and press Enter to stop the http process:
svcadm -v disable -st http
b Type the following command and press Enter to refresh the http process:
svcadm refresh http
c Type the following command and press Enter to restart the http process:
svcadm -v enable -s http
Result: The system displays the svc:/network/http:apache2 enabled
message.
message.
7
Follow these instructions to restart the DNCS http-dncsws process.
a Type the following command and press Enter to stop the http-dncsws
a Type the following command and press Enter to stop the http-dncsws
process:
svcadm -v disable -st http-dncsws
b Type the following command and press Enter to refresh the http-dncsws
process:
svcadm refresh http-dncsws
c Type the following command and press Enter to restart the http-dncsws
process:
svcadm -v enable -s http-dncsws
Result: The system displays the svc:/network/http-dncsws:apache2-dncsws
enabled message.
enabled message.
Allowing HTTP Access to the STB Staging Web Service
Complete the following procedure to allow a specific set-top staging client to have
HTTP access to the STB Staging Web Service using a separate web instance. Skip this
procedure if the STB Staging Web Service is configured on the same web instance as
the web UI.
1
HTTP access to the STB Staging Web Service using a separate web instance. Skip this
procedure if the STB Staging Web Service is configured on the same web instance as
the web UI.
1
Open an xterm window on the DNCS.
2
Log into the system as root:
a At the prompt, type
a At the prompt, type
su -
and press Enter.
b Type the root password and press Enter.
3 Open the
/etc/apache2/user-conf/SAIdncs.loadPIMS.auth.conf file using a text
editor.