Cisco Headend System Release 2.5 Mode D'Emploi
2-2
Setting Up Digital Source Definitions In an Overlay Environment
4004831 Rev B
Add a New Digital Source
Quick Path
DNCS Administrative Console > DNCS tab > System Provisioning tab > Source >
File > New
Time to Complete
Adding a new digital source takes approximately 5 minutes to complete.
Adding a New Digital Source
To add a new digital source, complete the following steps.
Note: This procedure applies to clear, secure, and PPV services. It does not apply to
Note: This procedure applies to clear, secure, and PPV services. It does not apply to
VOD services.
1.
On the DNCS Administrative Console, click the DNCS tab.
2.
Click the System Provisioning tab and select Source in the Service
Provisioning group.
3.
On the Source List window, click
File and select New.
4.
In the Set Up Source window, type
the Source Name (maximum 20
alphanumeric characters) to
identify this source.
Note: Use a naming scheme that
Note: Use a naming scheme that
indicates the source type (in this
case, digital), the channel number
the service will use, and the service
name. For example, D106 Golf
indicates a digital source (D)
providing content on channel 106
for the Golf channel.
5.
Type the Source ID (maximum 5
numeric characters). Typically the
source ID is 1000 plus the channel
number. In this case, the source ID
is 1106.
6.
Click Save. The system saves the service source information in the DNCS
database and closes the Set Up Source window. The Source List window
updates to include the new source.
7.
Go to Build a Partially Encrypted Session, next in this chapter.