Cisco Headend System Release 2.5 Guide De Montage
5-64
SR 2.5 and SR 3.5 Post Upgrade Procedures
78-738190-01 Rev B
Check the EAS Configuration
Checking the EAS Configuration
After installing the SR 2.5 and SR 3.5 software, verify that your EAS equipment is
still properly configured in the DNCS. Complete all of the procedures in Chapter 5,
Testing the EAS, of the Configuring and Troubleshooting the Digital Emergency Alert
System, For Use With All System Releases guide.
After completing the procedures in Chapter 5, Testing the EAS, of the Configuring
After completing the procedures in Chapter 5, Testing the EAS, of the Configuring
and Troubleshooting the Digital Emergency Alert System, For Use With All System Releases
guide, verify that you can generate an EAS message for the Emergency Alert
Controller (EAC), itself.