Cisco Headend System Release 2.5 Guide De Montage
78-738190-01 Rev B
Stopping the System Components
A-5
Stop System Components,
Continued
Stopping the DNCS
Complete these steps to stop the DNCS.
1.
At the DNCS, press the middle mouse button and then select DNCS Stop.
Note: If a confirmation message appears, click OK.
Note: If a confirmation message appears, click OK.
2.
From an xterm window on the DNCS, type dncsControl and then press Enter.
Result: The Dncs Control window appears.
Result: The Dncs Control window appears.
3.
Type 2 (for Startup/Shutdown Single Element Group), and then press Enter.
Result: The system displays all DNCS processes.
Note: The system updates the display periodically, or you can press Enter to
Result: The system displays all DNCS processes.
Note: The system updates the display periodically, or you can press Enter to
force an update.
4.
When the Curr Stt (Current State) field of the Dncs Control window indicates
that all of the DNCS processes have stopped, follow the on-screen instructions
to close the Dncs Control window.
5.
Go to Kill Active Sessions, next in this appendix.
Kill Active Sessions
After stopping the DNCS, follow these instructions to kill any active sessions that
After stopping the DNCS, follow these instructions to kill any active sessions that
maybe running.
1.
Log on to an xterm window on the DNCS as root user.
2.
Type . /dvs/dncs/bin/dncsSetup and then press Enter.
Important: Be sure to type the dot followed by a space prior to typing /dvs.
Result: The system establishes the root user environment.
Important: Be sure to type the dot followed by a space prior to typing /dvs.
Result: The system establishes the root user environment.
3.
Wait a few moments and then type showActiveSessions and press Enter.
Result: One of the following messages appears:
•
Result: One of the following messages appears:
•
A message indicating that the INFORMIXSERVER is idle
•
A message listing active sessions