Cisco Headend System Release 2.7
Chapter 1 Distributed BFS Plant Configurations
8
4017541 Rev B
Process Overview
Regardless of the particular configuration you use, the basic process for setting up a
distributed BFS is the same. In each case, you will perform the following tasks.
1 Configure the emulated MUX.
2 Configure the secondary BFS QAM.
3 Add the sessions to the secondary BFS QAM.
4 Configure the system for CVT for the secondary BFS QAM.
distributed BFS is the same. In each case, you will perform the following tasks.
1 Configure the emulated MUX.
2 Configure the secondary BFS QAM.
3 Add the sessions to the secondary BFS QAM.
4 Configure the system for CVT for the secondary BFS QAM.
Note: You will complete some additional steps to configure OSM Automux if
you are using non-overlapping frequencies, different program numbers, or both.
you are using non-overlapping frequencies, different program numbers, or both.