Cisco Headend System Release 2.7
Chapter 3 Upgrade the Services Portal
62
78-745238-01 Rev D
8 Widen the xterm window to the entire width of your screen. This helps you see
the remaining steps clearly.
9 Type the number corresponding to APPURL.
10 Retype the entire SAM URL, making the appropriate changes as detailed in the
10 Retype the entire SAM URL, making the appropriate changes as detailed in the
following steps.
a Add the version number of the Services Portal client (3.0.1.x) immediately
a Add the version number of the Services Portal client (3.0.1.x) immediately
after the ispguide.ptv; parameter. Use the format version=x.x.x.x
Example: If you are using Services Portal client version 3.0.1.5, type
version=3.0.1.5 (type the periods).
b Add the EID number (package number) immediately following the version
number parameter. You recorded the EID earlier in this document. Use the
format EID=#.
c We recommend that you download the Services Portal onto the set-tops as
part of the boot procedure. However, if you experience a significant increase
in boot time, you can set loadOnBoot to false (F).
Do you want to load the application on boot?
–
–
If yes, leave loadOnBoot=T.
–
If no, change the parameter to loadOnBoot=F.
Example:
bfs://SP_ib/ispguid.ptv;version=3.0.1.5; EID=2;obstructedRect=0,0,639,479;
bfs://SP_ib/ispguid.ptv;version=3.0.1.5; EID=2;obstructedRect=0,0,639,479;
loadOnBoot=T
Important: This information should appear continuously on one line. Do not
insert any spaces.
11 Type c and press Enter to continue the installation. The software begins loading
and the system displays an installation of SAIisp was successful message when
it has completed.
12 In the xterm window, type cd / and then press Enter. The root directory becomes
the working directory.
13 Type eject cd and then press Enter. The system ejects the CD.