Cisco Headend System Release 2.7 Mode D'Emploi
4011413 Rev B
5
Set Up Enhanced Channel Maps
Set-top Model
Required Client Code Version
Explorer 8240
DVR 1.5
Explorer 8240HD
DVR 1.5
Explorer 8300
DVR 1.5
Explorer 8300HD
DVR 1.5
Notes:
Before you create enhanced channel maps for your system, your DNCS should
be enabled to support enhanced channel maps. Call Cisco Services to enable this
environment. If enhanced channel maps are not enabled for your system, you
will only be able to placed hub-based (or virtual hub-based) channel maps on the
BFS. If your DNCS is enabled to support enhanced channel maps, then the
Applications Interface Modules tab on the DNCS Administrative Console will
contain a button called Group Definitions.
be enabled to support enhanced channel maps. Call Cisco Services to enable this
environment. If enhanced channel maps are not enabled for your system, you
will only be able to placed hub-based (or virtual hub-based) channel maps on the
BFS. If your DNCS is enabled to support enhanced channel maps, then the
Applications Interface Modules tab on the DNCS Administrative Console will
contain a button called Group Definitions.
You can create enhanced channel maps without associating them with hubs, but
the DNCS environment must be enabled to support enhanced channel maps that
are not associated with hubs.
the DNCS environment must be enabled to support enhanced channel maps that
are not associated with hubs.
Creating a Channel Map
Your first step in using enhanced channel maps is to create the new channel maps
that you want to use. These channel maps may be LUG-based or virtual-channel-
based. Refer to the DNCS online help for procedures to create the new channel
maps.
that you want to use. These channel maps may be LUG-based or virtual-channel-
based. Refer to the DNCS online help for procedures to create the new channel
maps.
After you create the new channel maps, complete the steps in this section to add the
new channel maps to your system.
new channel maps to your system.