Cisco Headend System Release 2.7 Guide De Montage
Chapter 3 Setting Up Hubs, MPEG Sources, MQAM Modulators, PCGs, and SCSs
40
4017650 Rev C
5 Click Yes. The confirmation window closes and the system removes the MPEG
source information from the DNCS database and from the MPEG Source List
window.
window.
6 Delete the MPEG source from your network map.
7 Do you need to delete another MPEG source?
7 Do you need to delete another MPEG source?
If yes, repeat steps 3 through 6.
If no, click File and choose Close to close the MPEG Source List window and
return to the DNCS Administrative Console. Go to step 8.
return to the DNCS Administrative Console. Go to step 8.
8 Continue making any other changes that you need to make to your network.
When finished, send a copy of your updated network map to the representative
who handles your account.
who handles your account.
Multiple Home Transport Streams
With the Distributed DNCS license enabled, there can be more than one site
configured in a DNCS and each site can have its own Home Transport Stream (TS).
Therefore, multiple edge devices can be configured as Home Transport Stream edge
devices as long as each one belongs to a different site.
configured in a DNCS and each site can have its own Home Transport Stream (TS).
Therefore, multiple edge devices can be configured as Home Transport Stream edge
devices as long as each one belongs to a different site.
There can be only one edge device within a site that can be actually designated as a
Home Transport Stream (Home TS). However, each site can have more than one hub
configured in it. Each additional hub in a site should have an edge device whose
frequency is a duplicate of the Home TS edge device of the site. The bootloader
program must be distributed to all the Home TS edge devices in all of the hubs.
Home Transport Stream (Home TS). However, each site can have more than one hub
configured in it. Each additional hub in a site should have an edge device whose
frequency is a duplicate of the Home TS edge device of the site. The bootloader
program must be distributed to all the Home TS edge devices in all of the hubs.
Only one Home TS edge device per headend/site can be an MQAM. All other Home
TS edge devices (in the main headend and at the remote headends) must be SCS
devices.
TS edge devices (in the main headend and at the remote headends) must be SCS
devices.