Cisco Headend Digital Broadband Delivery System Guide De Montage
Configure the Direct ASI Cards
4017650 Rev C
79
16 In the BFS Administration window, double-click a Source Name. A Set Up BFS
Source window similar to the following example opens and displays information
for Bootloader.
for Bootloader.
17 Verify the following information only for Bootloader and not for each source:
a If the source is not enabled, select enable.
b If dncsatm is not listed in the Selected Hosts field, move it from the Available
b If dncsatm is not listed in the Selected Hosts field, move it from the Available
Hosts field to the Selected Hosts field.
c Did you make any changes?
–
If yes, click Save to save your settings. Your new settings are saved, the
Set Up BFS Source window closes, and the Site DNCS BFS
Administration window re-opens.
Set Up BFS Source window closes, and the Site DNCS BFS
Administration window re-opens.
–
If no, click Cancel. The Set Up BFS Source window closes and the BFS
Administration window re-opens.
Administration window re-opens.
18 In the Site DNCS BFS Administration window, click File then select Close. The
BFS Administration window closes.