Cisco Headend System Release 2.5 Guide De Montage
Update the osmAutomux.cfg File
4042225 Rev A
75
Update the osmAutomux.cfg File
For systems that use the osmAutomux.cfg file, beginning with the SR 5.0 release, this
configuration file must include a headend map entry (HEMAP). If this entry is not
present in the osmAutomux.cfg file, the code version table (CVT) will not get
generated for remote BFS QAMs.
The following line must be added to the osmAutomux.cfg file:
configuration file must include a headend map entry (HEMAP). If this entry is not
present in the osmAutomux.cfg file, the code version table (CVT) will not get
generated for remote BFS QAMs.
The following line must be added to the osmAutomux.cfg file:
HEMAP|1|200
Note: 1 is the local headend id and 200 is the sample headend id.
Follow these steps to add the HEMAP entry to the osmAutomux.cfg file.
1 From the root xterm window on the DNCS, open the osmAutomux.cfg file in a
Follow these steps to add the HEMAP entry to the osmAutomux.cfg file.
1 From the root xterm window on the DNCS, open the osmAutomux.cfg file in a
text editor.
Example: vi osmAutomux.cfg
Example: vi osmAutomux.cfg
2
Add the following entry to the end of the file:
HEMAP|1|200
3 Save and close the file.