Cisco Headend System Release 2.7 Guide De Montage
Chapter 3 SR i4.2.2 Common Upgrade Procedures
58
4036631 Rev B
Check the Status of the ASI Card
1 As dncs user on the DNCS, type /opt/solHmux64/vpStatus -d /dev/Hmux0 -P 0
and press Enter. After a few minutes, the system displays the status of the ASI
card.
Example: Your results should look similar to, but not exactly like, the following
example.
card.
Example: Your results should look similar to, but not exactly like, the following
example.
Note: An improperly installed ASI card will yield either no results or results that
clearly show an error.
clearly show an error.
2 Do the results from step 1 look similar to the image displayed in step 1?
If yes, go to the next procedure in this chapter.
If no, type /usr/sbin/shutdown -y -g0 -i6 and then press Enter.
3 Log on to the DNCS as dncs user and open an xterm window.
4 Type /opt/solHmux64 -d /dev/Hmux0 -P 0 and then press Enter.
5 Is the dncs user able to open the ASI card?
4 Type /opt/solHmux64 -d /dev/Hmux0 -P 0 and then press Enter.
5 Is the dncs user able to open the ASI card?
If yes, go to the next procedure in this chapter.
If no, call Cisco Services for assistance.