Cisco Headend System Release 2.7 Guide De Montage
Upgrade the Application Server Software
4036631 Rev B
63
11 Are you upgrading a Sun Blade 150?
If yes, go to step 18.
If no, go to 12.
12 Type shutdown -y -g0 -i0 and press Enter.
13 At the OK prompt, type printenv auto-boot? and then press Enter.
14 Is auto-boot set to true?
13 At the OK prompt, type printenv auto-boot? and then press Enter.
14 Is auto-boot set to true?
If yes, type setenv auto-boot? false, press Enter, and go to step 15.
If no, go step 16.
15 Type reset-all and press Enter.
16 Type probe-scsi-all and press Enter. The system lists the path to all devices that
16 Type probe-scsi-all and press Enter. The system lists the path to all devices that
are connected to the Ultra 5 Application Server.
17 Write down the following information that pertains to the path for the external
DVD device:
path = ___________________________________
Target = _________________________________ = X
Unit = ___________________________________ = Y
path = ___________________________________
Target = _________________________________ = X
Unit = ___________________________________ = Y
18 Depending on the Application Server you are upgrading, complete one of the
following boot commands:
If you are upgrading a Sun Blade 150, type reboot -- "cdrom - install" and
press Enter.
Important: Be certain that you type two dashes after "reboot" and that
"cdrom - install" is enclosed in double quotes.
press Enter.
Important: Be certain that you type two dashes after "reboot" and that
"cdrom - install" is enclosed in double quotes.
If you are upgrading an Ultra 5, type boot [path]/sd@X,Y:f - install and press
Enter.
Important: If this command does not execute, re-run the command but
substitute disk for sd in the boot path.
Example: OK> boot /pci@1f,0/pci@1/scsi@8/sd@0,0:f - install
Enter.
Important: If this command does not execute, re-run the command but
substitute disk for sd in the boot path.
Example: OK> boot /pci@1f,0/pci@1/scsi@8/sd@0,0:f - install
Results:
The Application Server boots from the DVD.
The Solaris OS installs.
Note: An Application Server with only 256 MB of memory will not boot into
the OpenWindows desktop environment. Instead, the server will boot into a
text-based installation mode, and the installation will still complete
successfully.
Note: An Application Server with only 256 MB of memory will not boot into
the OpenWindows desktop environment. Instead, the server will boot into a
text-based installation mode, and the installation will still complete
successfully.
All Application Server software packages install.