Cisco Headend System Release 2.7 Guide De Montage
Logging on to the RNCS Servers
78-4021167-01 Rev D
5
13 Type setsc netsc_ipaddr [IP address] and press Enter. This command
establishes the unique IP address of the network management port.
Notes:
Notes:
Substitute the IP address of the network management port of the RNCS
server for [IP address].
The network administrator can help you determine the IP address.
14 Type setsc netsc_ipnetmask [netmask] and press Enter. This command
establishes the netmask of the network management port.
Notes:
Notes:
Substitute the netmask of the network management port of the RNCS server
for [netmask].
The network administrator can help you determine the netmask.
15 Type setsc netsc_ipgateway [IP address of gateway or router] and press Enter.
This command establishes the IP address of the gateway or router of the network
management port.
Notes:
Notes:
Substitute the IP address of the gateway or router of the network
management port of the RNCS server for [IP address of gateway or router].
The network administrator can help you determine the IP address.
16 Type setsc sc_powerstatememory true and press Enter. This command sets the
sc_powerstatememory variable to true.
17 Type showsc and press Enter. The system displays the value of variables
associated with the ALOM port.
18 Is the sc_powerstatememory variable set to true?
If yes, type q to exit from the showsc display.
If no, type q to exit from the showsc display. Repeat this procedure from step
16.
19 Type resetsc and press Enter. A confirmation message appears.
20 Type y and press Enter. After a few messages, the system prompts you to type #.
20 Type y and press Enter. After a few messages, the system prompts you to type #.
to return to the ALOM port.
21 Type #. (Do not press Enter.). The Login prompt appears.
22 Did the Login prompt appear after you completed step 21?
22 Did the Login prompt appear after you completed step 21?
If yes, go to step 23.
If no (the sc> prompt appeared), go to step 24.
23 If the Login prompt appeared after you completed step 21, follow these
instructions.
a Type admin and press Enter.
b Type the admin password and press Enter. The sc> prompt appears.
a Type admin and press Enter.
b Type the admin password and press Enter. The sc> prompt appears.