Cisco Headend System Release 2.7 Guide De Montage
Chapter 2 Installing the Software
26
4023373 Rev B
c Repeat steps a and b to change another setting. After all settings are
correct, type c (to continue) and then press Enter to start the installation.
20 When the installation is complete, the system displays a message stating that the
installation was successful, lists the directory where installation messages were
stored, and displays a root user prompt.
Notes:
stored, and displays a root user prompt.
Notes:
The installation should take about 5 minutes.
The log file for the SARA Server software is
/var/sadm/system/logs/SAIapsrv_3.6.x.x_install.log.
/var/sadm/system/logs/SAIapsrv_3.6.x.x_install.log.
21 Did the system indicate that the installation was successful?
If yes, type cd / and press Enter to move to the root directory. Then continue
with the next step in this procedure.
with the next step in this procedure.
If no, contact Cisco Services for assistance.
22 Did you manually mount the CD?
If no, type eject cdrom and press Enter. Then go to step 25
If yes, type umount /cdrom and press Enter. Go to step 23
23 Manually eject the CD by pressing the eject button on the server
24 Type /etc/init.d/volmgt start and press Enter. The volume management process
24 Type /etc/init.d/volmgt start and press Enter. The volume management process
starts.
Note: Type pgrep –fl vold and press Enter to verify that the volume
management process has started
Note: Type pgrep –fl vold and press Enter to verify that the volume
management process has started
25 Remove the CD from the CD drive and store it in a secure location.
26 Go to Verify SARA Server Versions (on page 27).
26 Go to Verify SARA Server Versions (on page 27).