Cisco Headend System Release 3.2 Guide De Montage
Configure the ocdlManager
4017307 Rev C
17
4 The DNCS OCAP Common Download Configuration window opens.
Note: The values shown in the following window do not represent the actual
configuration values.
5 Follow these instructions to configure the Session Configuration section of the
DNCS OCAP Common Download Configuration window.
a In the Session Number field, type 198 (default value).
b In the QAM Frequency field, type the 3-digit value that represents the
a In the Session Number field, type 198 (default value).
b In the QAM Frequency field, type the 3-digit value that represents the
frequency of the OCDL QAM. For example, to enter the frequency 411.00,
you would type 411 without the zeros.
c In the Session Device Id field, if the Id value is not already listed, type
00:00:00:00:00:00.
d In the Datarate field, type 500000.
e In the Blocksize field, type 4000.
f In the VpiVci field, type 64 or 256, depending on your QAM modulator.
g In the QAM Output TS Id field, type the value that represents the output
e In the Blocksize field, type 4000.
f In the VpiVci field, type 64 or 256, depending on your QAM modulator.
g In the QAM Output TS Id field, type the value that represents the output
TSID for the OCDL MPEG source.
h In the Inband ASI Device field, type /dev/Hmux1.