Cisco Headend System Release 2.7 Guide De Montage
4040195 Rev B
5
Pre-Installation Checks
7 Not Installed
8 Not Installed
9 Not Installed
10 Not Installed
11 Not Installed
If no, go to the next step.
12 Type eeprom boot-device and press Enter. Do the results show that disk:a is
the first entry listed as a boot device?
If yes, the boot device is configured properly.
If no, type
eeprom boot-device=disk:a
and press Enter to reset the
boot device to the original disk.
13 Type dumpadm -d swap and press Enter to set the dump device to swap.
14 Type dumpadm and press Enter to verify that the dump device is set to swap and
14 Type dumpadm and press Enter to verify that the dump device is set to swap and
that savecore is enabled.
Example:
# dumpadm
Dump content: kernel pages
Dump device: /dev/md/dsk/d501 (swap)
Savecore directory: /var/crash/vod7
Savecore enabled: yes