Cisco Headend System Release 2.7 Guide De Montage
Stop System Components
4038415 Rev A
45
8 Wait a few moments and then type the following command and press Enter. The
system reports whether the dncsInitd process is still running.
ps -ef | grep dncsInitd
9 Is the dncsInitd process still running?
If yes, repeat steps 7 through 9.
If no, go to the next procedure in this chapter.
Ensuring No Active Database Sessions on the DNCS
Follow these instructions to ensure that there are no active database sessions
running on the DNCS.
running on the DNCS.
Notes:
You need to be root user to run some of the commands in this procedure.
If you have followed the instructions so far, you should still have a xterm
window open and be logged into it as root user.
window open and be logged into it as root user.
1 Are you already logged on to an xterm window as root user?
If yes, go to step 2.
If no, log on to the xterm window as root user.
2 Type the following command and press Enter. The system establishes the root
user environment.
. /dvs/dncs/bin/dncsSetup
Important: Be sure to type the dot followed by a space prior to typing /dvs.
3 Type the following command and press Enter.
showActiveSessions
Results: One of the following messages appears:
A message indicating that the INFORMIXSERVER is idle
A message listing active sessions
4 Did the message in step 3 indicate that there are active sessions?
If yes, go to step 5.
If no, go to step 6.