Cisco Headend Digital Broadband Delivery System Guide De Montage
Chapter 2 SR 2.8.2/3.8.2/4.3.2 Upgrade Procedures
56
4038415 Rev A
2 Record the version number in the Actual Results column of the accompanying
table for each Package Name you check.
Component
Pkg Name
Expected
Results
Results
Actual Results
DNCS Application
SAIdncs
4.3.2.x
DNCS GUI
SAIgui
4.3.2.x
DNCS WUI
SAIwebui
4.3.2.x
3 Repeat steps 1 and 2 for each Package Name in the table in step 2.
4 Do the first three digits of the Actual Results match the first three digits of the
4 Do the first three digits of the Actual Results match the first three digits of the
Expected Results for each component in the table in step 2?
If yes, go to the next procedure in this chapter.
If no, call Cisco Services and inform them of the discrepancy.
Note: The build number (the fourth digit of the version number) may differ.
Verifying the Application Server Version
Follow these instructions to verify the installed software versions on the Application
Server.
1 From an xterm window on the Application Server, type the following command
Server.
1 From an xterm window on the Application Server, type the following command
and then press Enter.
pkginfo -l [Package Name]
Note: The –l is a lowercase L.
Example: Notice that the Version field indicates that Application Server version
3.6.2.0 is installed and the Status field indicates that the software is completely
installed.
3.6.2.0 is installed and the Status field indicates that the software is completely
installed.