Cisco Headend System Release 2.7 Mode D'Emploi
Verify the Staging Process
4025012 Rev B
19
Verify the Staging Process
After the staging process is complete, use the following checklist to check each
Tuning Adapter and confirm that the staging process was correctly completed.
1 Verify that the front-panel LED on the Tuning Adapter is steadily on and not
1 Verify that the front-panel LED on the Tuning Adapter is steadily on and not
blinking. If the LED is blinking, refer to LED Indicators Displayed During a
Software Download (on page 16) to understand what the blinking pattern
indicates.
2 Verify that the UDCP is receiving audio and video on the following channels:
Analog channels (if supported)
Digital channels
Switched digital channels
Premium channels
3 Access the Tuning Adapter diagnostic screens on the UDCP device using the
process required by the UDCP device. Verify that the ENTITLEMENT AGENTS
/ ISE[1] field displays 0x0000001.
4 View the diagnostic screens and verify that the date in the SUB EXPIRES field is
at least 30 days in the future.