Cisco Headend System Release 2.7
DNCS and Application Server Hardware Platforms
4036044 Rev B
5
DNCS and Application Server Hardware Platforms
Introduction
This section describes the hardware configurations that are supported by SR 4.3.1.
Running the Doctor Report
1 If necessary, open an xterm window on the DNCS.
2 Type cd /dvs/dncs/Utilities/doctor and then press Enter. The
2 Type cd /dvs/dncs/Utilities/doctor and then press Enter. The
/dvs/dncs/Utilities/doctor directory becomes the working directory.
3 Type doctor and then press Enter. The system generates a list of parameters that
you can use to run the Doctor Report. Each parameter causes the Doctor Report
to generate output with specific configuration information.