Cisco Headend System Release 2.7 Guide De Dépannage
Configure Monthly Tests
4024428 Rev B
51
Example: If the Default Duration for the RMT of your EAS encoder/decoder is
60 minutes, your Delay Between Repeats value must be
[(60/2 = 30) + 1 = 31 x 60 = 1860 seconds].
Note: Make sure that the Delay Between Repeats is always at least 6 seconds.
Note: Make sure that the Delay Between Repeats is always at least 6 seconds.
9 Click Save. The system saves your changes and the Set Up MMM Configuration
window closes.
10 In the MMM Configuration List window, select File > Close. The MMM
Configuration List window closes.
Setting Up Monthly Tests
This section provides procedures for setting up the RMT on the ISDS.
1 On the ISDS Administrative Console, click the ISDS tab.
2 Click the System Provisioning tab.
3 Click EAS Config. The Set Up Emergency Alert System Configuration window
1 On the ISDS Administrative Console, click the ISDS tab.
2 Click the System Provisioning tab.
3 Click EAS Config. The Set Up Emergency Alert System Configuration window
opens.
4 Highlight the Required Monthly Test row.
5 Click the Configuration Name arrow. A list of possible configuration names
5 Click the Configuration Name arrow. A list of possible configuration names
appears.
6 Select the configuration (Cfg01) you chose in step 3 of
What You Need (on page
46). The configuration you chose appears in the Configuration Name column.
7 Click Save. The system saves the new RMT configuration.
8 Click Cancel. The Set Up Emergency Alert System Configuration window closes.
8 Click Cancel. The Set Up Emergency Alert System Configuration window closes.