Cisco Headend Digital Broadband Delivery System Guide De Dépannage
Verify the Trilithic System
4024428 Rev B
9
Verify the Trilithic System
This section provides procedures for verifying proper configuration and
performance of the EAC if you are using a Trilithic EAS.
Important: For detailed installation procedures, refer to the documentation that
Important: For detailed installation procedures, refer to the documentation that
came with your EAC system.
Note: You can find troubleshooting information on this EAC system in the following
Note: You can find troubleshooting information on this EAC system in the following
topics in this document:
Troubleshooting the Trilithic System (on page 65)
Troubleshooting Trilithic System Performance (on page 66)
Trilithic EAC Configuration
Use the values in the following table to set the parameters of your Trilithic EAC.
Parameter
Value
Devices
Contains the IP address of the
ISDS
FTP Username
easftp
FTP Password
easftp
FTP Port
21
TCP/IP Port
4098
Digital EAS Support
enabled
Use EAS Duration
selected
Time Zone
Correct value for your location
Originator
EAS Broadcast Station or Cable
System selected
EASyNIC Ethernet Port enabled
IP Address
IP address of the ISDS
Subnet Mask
Correct value for your installation
Default Gateway
Correct value for your installation
Important: There may be additional parameters you need to set on your EAC to
complete the configuration process. Refer to the EAC documentation for specific
troubleshooting and configuration information.