Cisco Cisco DOCSIS EuroDOCSIS Transponder for GainMaker Nodes Guide De Montage
Chapter 3 Operation
Result: The chosen device file is downloaded and shown in the device files list.
3. Click Reset.
Result: The transponder is restarted and the chosen device file is loaded.
To Upload the Device File for backup to the TFTP Server:
1. Click on the correct device file in the stored files list under the information tab.
2. Click Upload beneath the list.
2. Click Upload beneath the list.
Result: The current device file is stored in the computer’s hard drive for backup.
Note: Click Upload All if you intend to upload all the device files in use. Click
Note: Click Upload All if you intend to upload all the device files in use. Click
Format only when you intend to delete all the device files in the current flash
memory.
To Remove a Device File:
1. Click on the intended device file in the stored files list.
2. Click Delete to remove the chosen device file.
2. Click Delete to remove the chosen device file.
Firmware Upgrade
The transponder firmware integrates the web interface is available on the
transponder. Access the interface by typing the cable modem IP address of the
transponder into your web browser. The interface includes status data for the cable
modem, the HMS section, High Speed Internet Access (HSIA) diagnostics.
1. Click Transponder on the main menu.
2. Click Firmware Upgrade in the left panel.
2. Click Firmware Upgrade in the left panel.
Result: The firmware upgrade window is displayed.
40
OL-31165-02