Cisco Cisco DOCSIS EuroDOCSIS Transponder for GainMaker Nodes Guide De Montage

Device Configurations

Introduction

The Device Configurations menu enables you to view and configure the device with

the transponder installed, including its alarm setting, forward/reverse RF

configurations, optical transmitter settings and so on.
Note: The Device Configurations menu displays different options based on the

devices. Cisco Compact EGC Segmentable Node A90200 is used in this guide for

example. The following contents are applicable based on the assumption that the

necessary components are successfully installed on your device. For example, the

Optical Transmitter section on page 3-30 becomes inapplicable if the device is not

successfully installed with an optical transmitter. For any uncertainties, refer to the

installation and operation guide of your device.

Identification

1.  Click Device on the main menu.
2.  Click Identification in the left panel.
Result: The identification window is displayed.

OL-31165-02