Cisco Model 6109 6 MHz Off-Air Reference (NTSC) Guide De Montage
USRM Web Interface - Platform Components
4039132 Rev B
109
SnmpManager - Configuration Page
The SNMP Manager provides SNMP management services allowing software
components to issue SNMP Get and Set commands.
components to issue SNMP Get and Set commands.
Most managed resources are implemented with device-specific software
components. The software model for these components contains SNMP object
identifier (OID) references that allow the USRM to query the device to obtain its
configuration. Configuration information consists of frequency, TSID, modulation
format, the presence of plug-in cards for devices with plug-in line cards, and other
information. The effect is that provisioning of configuration information in the
USRM is not required. Instead, the USRM queries the device and learns the device
configuration.
components. The software model for these components contains SNMP object
identifier (OID) references that allow the USRM to query the device to obtain its
configuration. Configuration information consists of frequency, TSID, modulation
format, the presence of plug-in cards for devices with plug-in line cards, and other
information. The effect is that provisioning of configuration information in the
USRM is not required. Instead, the USRM queries the device and learns the device
configuration.
A managed device can be configured to the unmanaged state. Most devices allow
the management state to be configured to unmanaged on the Snmp Config page for
the device. This state inhibits the SNMP manager and allows you to configure the
settings directly into the USRM.
the management state to be configured to unmanaged on the Snmp Config page for
the device. This state inhibits the SNMP manager and allows you to configure the
settings directly into the USRM.
The following illustration shows the SnmpManager - Configuration page.