Cisco Model 6109 6 MHz Off-Air Reference (NTSC) Guide De Montage

 

124 

4039132 Rev B 

TrapAddress 

The SNMP manager IP address to receive the trap. 

Note: In a supervised (DNCS) system, all trap address 
parameters are provisioned by the DNCS. Locally 
entered addresses are overwritten with the value n/a 
during the next provisioning from the DNCS. 

In a supervised system, trap addresses should be set 
from DNCS on the Sys Config.SDV Parameters GUI. This 
GUI does not set the trap type. If V2c traps are desired, 
complete the following steps to change the trap type for 
an existing address: 

Note the current address. 

Delete the current address, and then click Commit 
Changes. 

Set the trap type to the desired value. 

Re-enter the original address. 

To remove a trap address, delete the address.