Cisco Model 6109 6 MHz Off-Air Reference (NTSC) Guide De Montage

Page de 450
 
Chapter 3    USRM Web Interface 
 
 
 
170 
4039132 Rev B 
ResourceManager - Adaptors - ResourceAdaptor D6 - Configuration Page 
The following illustration shows the ResourceManager - Adaptors - Resource 
AdaptorD6 - Configuration page. 
 
Parameters 
The following table explains the ResourceManager - Adaptors - ResourceAdaptor D6 
- Configuration page parameters. 
Parameter 
Description 
VrepIdentifier 
Must be uniquely set within its Streaming Zone. 
Typically set to the IPv4 address of the interface that is 
communicating to the D6 QAMs. 
ComponentName 
Describes the device in the open message, typically set to 
USRM. Must match the setting on the D6 QAM devices. 
VendorSepcificString 
Optional text string used in the Open message. 
Default:  Cisco 
HoldTime 
If no communication is received after this timeout 
expires, the connection to the other D6 device will be 
closed. 
VrepVersion 
The current VREP version is two. Only if the QAMs that 
are to be connected to require it should this be set to one.