Cisco Model 6109 6 MHz Off-Air Reference (NTSC) Guide De Montage
USRM Web Interface - Resource Manager
4039132 Rev B
211
Parameter
Description
State
The current state of the edge device.
Upon startup, the state is set to Init. In this state, the
resource manager attempts to establish communication
with the edge device.
resource manager attempts to establish communication
with the edge device.
Upon success, the state is set to Startup. In the Startup
state, the resource manager queries the edge device to
determine that all required session-Ids are created. Upon
success, the resource manager refreshes all bindings and
transitions to the OK state, the normal state of the edge
device.
state, the resource manager queries the edge device to
determine that all required session-Ids are created. Upon
success, the resource manager refreshes all bindings and
transitions to the OK state, the normal state of the edge
device.
If the USRM has not used an edge device for the
transaction timeout (typically 2000 ms), the resource
manager tests that the edge device is OK using a status
query. When the edge device does not perform the
operation with success (command or status query), a
counter is incremented. If the edge device does not
succeed for n successive operations, the device is set to
the Fail state. The value of n is configured as
FailThreshold on this page. After failure of the resource,
the resource manager then uses the startup procedure to
recover the device.
transaction timeout (typically 2000 ms), the resource
manager tests that the edge device is OK using a status
query. When the edge device does not perform the
operation with success (command or status query), a
counter is incremented. If the edge device does not
succeed for n successive operations, the device is set to
the Fail state. The value of n is configured as
FailThreshold on this page. After failure of the resource,
the resource manager then uses the startup procedure to
recover the device.
Note: FailThreshold is not applicable to the RFGW1.
InterfaceStatus
Indicates the status of the interface. This only applies for
session-based device.
session-based device.
Fail - indicates the interface has failed and the device is
not available for service.
not available for service.
OK - indicates the interface is working properly.
TransactionTimeout
The amount of time the server will wait for the device to
respond to a command. Not applicable to the D6 QAM.
respond to a command. Not applicable to the D6 QAM.
Commands
The number of commands (binds and unbinds) to the
edge device.
edge device.
CommandFailures
The number of commands that failed.
QueueDepth
The depth of the queue for this edge device.
MaxQueueDepth
The max queue depth for the edge device. This
parameter typically is large on startup in Max mode. In
Max mode, the server fills the bandwidth with programs.
The requests to activate the programs are placed in the
queue.
parameter typically is large on startup in Max mode. In
Max mode, the server fills the bandwidth with programs.
The requests to activate the programs are placed in the
queue.
Allocated Bandwidth
The bandwidth allocated to this device.
Active Sessions
The number of active sessions.