Cisco Model 6109 6 MHz Off-Air Reference (NTSC) Guide De Montage
USRM Web Interface - Resource Manager
4039132 Rev B
239
ResourceManager - QAM - Snmp Config Page
The USRM manages devices (QAMs, encryptors, etc.) used to deliver services. An
integral SNMP manager provides SNMP management services allowing software
components to issue SNMP Get and Set commands. Each device has its own SNMP
Config page for use in configuring the device.
integral SNMP manager provides SNMP management services allowing software
components to issue SNMP Get and Set commands. Each device has its own SNMP
Config page for use in configuring the device.
The following illustration shows an example ResourceManager - QAM - Snmp
Config page.
Config page.
Parameters
The following table explains the ResourceManager - QAM - Snmp Config page
parameters.
parameters.
Parameter
Description
SnmpBaseOid
The device SNMP base object identifier (OID), which
allows the USRM to query the device to obtain its
configuration.
allows the USRM to query the device to obtain its
configuration.
SnmpConfig
Sets the management state for the device, as follows:
Managed - the device is configured via SNMP.
Unmanaged - the SNMP manager is inhibited, allowing
you to configure the settings directly on the USRM.
you to configure the settings directly on the USRM.
SnmpSetCommString
The SNMP SET community string.
Default: private