Cisco Model 6109 6 MHz Off-Air Reference (NTSC) Guide De Montage
Chapter 4 Operation
294
4039132 Rev B
NGOD QAM Setup
Perform the following steps to set up a NGOD QAM.
1 Select the Resource Manager - Configuration page in the USRM web interface.
2 Enter the name of the NGOD zone in the StreamingZone parameter field, as
1 Select the Resource Manager - Configuration page in the USRM web interface.
2 Enter the name of the NGOD zone in the StreamingZone parameter field, as
shown in the following illustration.
Note: This name must exactly match the name entered on the NGOD QAM.
3 Click Commit Changes.
4 Set up the streaming zone and the ERM IP (the IP address of the USRM Service
4 Set up the streaming zone and the ERM IP (the IP address of the USRM Service
port) on the NGOD QAM.