Cisco Model 6109 6 MHz Off-Air Reference (NTSC) Guide De Montage
Creating QAMs on the USRM
4039132 Rev B
297
GQAM Setup Using GQAM Model
Perform the following steps to set up a GQAM using a GQAM model.
1 Expand the ResourceManager - QAMs branch in the USRM web interface, and
1 Expand the ResourceManager - QAMs branch in the USRM web interface, and
then select the QAM <QamName> - Chassis page.
Note: In this example, the QAM is named QAM GQAM03.
Note: In this example, the QAM is named QAM GQAM03.
2 Enter the CtrlIPAddress, and then click Commit Changes.