Cisco Model 6109 6 MHz Off-Air Reference (NTSC) Guide De Montage
Creating QAMs on the USRM
4039132 Rev B
307
4 Verify the ServiceGroupId, ModulationFormat, AdminState, OutputLevel, and
ChannelMode(s) as required.
5 Select the ResourceManager - QAMs - QAM <QamName> - Edge Inputs page.
6 Verify the edge inputs.
Note: If only one input is to be used or if the RFGW-1 will be controlling the load
balancing, set the Port 3 AdminState to OutOfService. If the USRM will be
controlling the load balancing, verify or set Port 1 and Port 3 AdminState to
InService as shown above.
balancing, set the Port 3 AdminState to OutOfService. If the USRM will be
controlling the load balancing, verify or set Port 1 and Port 3 AdminState to
InService as shown above.