Cisco Model 6109 6 MHz Off-Air Reference (NTSC) Guide De Montage
Adding and Deleting Service Groups to a USRM Using the Web Interface
4039132 Rev B
321
Removing a SDV-Enabled Service Group Via the DNCS
Perform the following steps to remove a SDV-enabled service group via the DNCS.
1 Access the Service Group Data - Open Service Group screen.
1 Access the Service Group Data - Open Service Group screen.
2 Set the Primary SDV Server field to None.
3 Recommended optional step: If a service group is being migrated as-is to
3 Recommended optional step: If a service group is being migrated as-is to
another USRM, then leave the QAM carriers in the Selected Ports window and
leave the mini-carousel IP address. If the service group is being eliminated, then
remove both completely.
leave the mini-carousel IP address. If the service group is being eliminated, then
remove both completely.
4 Click Save Service Group to save your changes.
5 Monitor the EventLog to verify that the SNMP commands are sent by the DNCS.
5 Monitor the EventLog to verify that the SNMP commands are sent by the DNCS.