Cisco Model 6109 6 MHz Off-Air Reference (NTSC) Guide De Montage
Rack Mounting
4039132 Rev B
27
3 Attach the angle support brackets to the equipment rack using rack screws or
other mounting hardware that came with your rack.
4 Slide the USRM into the equipment rack and on to the angle support brackets
from the front of the rack until the front panel mounting flanges are flush with
the front mounting rails of the rack.
the front mounting rails of the rack.
5 While holding the USRM in this position, make sure that the bottom of the
USRM is supported by the angle support brackets on both sides along the entire
depth of the USRM chassis.
depth of the USRM chassis.
6 Check that the USRM front panel thumbscrews on both sides align with the
proper mounting holes in the equipment rack.