Cisco Model 6109 6 MHz Off-Air Reference (NTSC) Guide De Montage
USRM Web Interface - Resource Manager
4039132 Rev B
217
Parameter
Description
Protection (RFGW1 Only)
Sets protection of the device to Manual or Automatic.
When set to Automatic, a failed QAM will be protected
by a normal QAM in the same service group. This is
dependent on the
ResourceManager.Configuration.ResourceProtection
setting. On all other QAM types, this parameter is on the
Chassis page.
When set to Automatic, a failed QAM will be protected
by a normal QAM in the same service group. This is
dependent on the
ResourceManager.Configuration.ResourceProtection
setting. On all other QAM types, this parameter is on the
Chassis page.
GbePortProtection (RFGW1
Only, USRM 1.7.1 and above)
Only, USRM 1.7.1 and above)
The USRM will provide Gbe Port Protection for the
RFGW1. When a GbE Port reports a LOS Link state, the
USRM will move sessions to other GbE ports on the same
device, as bandwidth allows.
RFGW1. When a GbE Port reports a LOS Link state, the
USRM will move sessions to other GbE ports on the same
device, as bandwidth allows.
GbePortRevertTime (RFGW1
Only, USRM 1.7.1 and above)
Only, USRM 1.7.1 and above)
The amount of time the USRM waits before using a GbE
port that has recovered from the LOS link state. This
ensures that adequate time has elapsed for a complete
restoration of the link.
port that has recovered from the LOS link state. This
ensures that adequate time has elapsed for a complete
restoration of the link.
AnnexMode (RFGW1 Only)
The ITU annex in use.
FequPlan (RFGW1 Only)
Type frequency plan standard in use.
DejitterBufDepth (RFGW1
Only)
Only)
The amount of buffer used to dejitter the incoming
signal.
signal.
GbePortOperMode (RFGW1
Only)
Only)
Sets/displays the Gbe Port configuration of the RFGW1.
Independent or Dual Port Pair.
Independent or Dual Port Pair.
Provisioning (RFGW1 Only) Not used in this version of USRM software.