Cisco Model 6109 6 MHz Off-Air Reference (NTSC) Guide De Montage
Chapter 3 USRM Web Interface
176
78-4021139-01 Rev D
Parameter
Description
QueueDepth
The depth of the queue for this edge device.
MaxQueueDepth
The max queue depth for the edge device. This
parameter typically is large on startup in Max mode. In
Max mode, the server fills the bandwidth with programs.
The requests to activate the programs are placed in the
queue.
Allocated Bandwidth
The bandwidth allocated to this device.
Active Sessions
The number of active sessions.
QamGraphic
Click Display to view a bandwidth chart.
OverheadBandwidth
Configures the overhead bandwidth to be applied to all
QAM channels on the device. The server software will
reserve this much bandwidth on all QAM channels.
EmbeddedSoftwareVersion
(XDQA24 only)
The version of the software on the unit.
SwitchingMode
(XDQA24 only)
Sets the switching mode for the device, as follows:
UdpPort - This mode indicates a table-based QAM
UdpPort - This mode indicates a table-based QAM
device.
Session - This mode indicates a session-based QAM
Session - This mode indicates a session-based QAM
device.
VrepVersion
(D6QAM only)
The version of the VREP protocol as reported on the D6
interface.
SessionTimeout
(D6QAM only)
The session timeout for this device. The session timeout
is the minimum time between session keep-alive
messages for the session. The session is released if a
keep-alive message is not received within the minimum
time period.
ConnectionTimeout
(D6QAM only)
The connection timeout for this device. The connection
timeout is the minimum time between connection keep-
alive messages for the connection. The connection is
released if a keep-alive message is not received within
the minimum time period.
ProductName (GQIQAM
Only)
User-supplied data typically used to identify the type of
device.
DeviceName (RFGW1 Only) Sets/displays the name given to the device. The name
can be set from the USRM WebUI or RFGW1 WebUI.
ActiveReleaseVersion
(RFGW1 Only)
The release version currently running on the device.
InactiveReleaseVersion
(RFGW1 Only)
Another version in the memory of the RFGW1, which
can be activated from the RFGW1 WebUI.