Cisco Model 6109 6 MHz Off-Air Reference (NTSC) Guide De Montage
USRM Web Interface - Resource Manager
78-4021139-01 Rev D
207
Parameter
Description
FailThreshhold
The failure threshold for a device. When a device fails for
this many consecutive attempts, the state is set to the
Failure state.
Note: You must be service level to modify this
Note: You must be service level to modify this
parameter.
CtrlIpAddress
Configures/displays the IP address of the management
port of the chassis.
AdminState
The AdminState for the device.
State
The current state of the edge device.
Upon startup, the state is set to Init. In this state, the
Upon startup, the state is set to Init. In this state, the
resource manager attempts to establish communication
with the edge device.
InterfaceStatus
Indicates the status of the interface.
Fail - indicates the interface has failed and the device is
Fail - indicates the interface has failed and the device is
not available for service.
OK - indicates the interface is working properly.
OK - indicates the interface is working properly.
TransactionTimeout
The amount of time the server will wait for the device to
respond to a command.
Commands
The number of commands (binds and unbinds) to the
edge device.
CommandFailures
The number of commands that failed.
QueuDepth
The depth of the queue for this edge device.
MaxQueDepth
The max queue depth for the edge device. This
parameter typically is large on startup in Max mode. In
Max mode, the server fills the bandwidth with programs.
The requests to activate the programs are placed in the
queue.
LastAccessTime
Time when this CA Manager was last accessed for a
Conditional Access operation.