Cisco Model 6109 6 MHz Off-Air Reference (NTSC) Guide De Montage
Chapter 3 USRM Web Interface
244
78-4021139-01 Rev D
Parameters
The following table explains the SdvSm - Offered Progs/Base page parameters.
The following table explains the SdvSm - Offered Progs/Base page parameters.
Parameter
Description
Program
Sequential number in the list.
SourceId
The identifier of a switched program. When the client
requests a program using the CCMIS protocol, the
request uses this identifier to indicate the requested
program. If the requested sourceId is not in the table, the
request is considered to be a request for a non-switched
program and the request is merely logged with no
further action.
AdminState
The state of the offered program. The state InService
indicates the program is available for use by clients. The
state OutOfService indicates the program is not available.
A request for a program in the OutOfService state is
denied, and the EventLog entry will state
RC=ProgramOutOfService, which corresponds to the
CCMIS response code
rspBcProgramOutOfService(0x0006). The Terminate state
causes the server to force all users (i.e., tuners) away
from the program by displaying a "channel not available"
banner on the set-top box. After the users are moved
away from the program, the state is set to OutOfService.
The NotReady state is a transition state used by the SDV
Manager. When the SDV Manager is provisioning the
offered program, the state is set to NotReady during the
provisioning. The Delete state removes the program from
the Offered Programs table.
Note: A program should be released before it is deleted.
Note: A program should be released before it is deleted.
Failure to release a program before deleting it may result
in stranded sessions.
Name
A short text name for the program. The name is shown
on displays and also appears in the MCMIS stream.