Cisco Model 6109 6 MHz Off-Air Reference (NTSC) Guide De Montage
USRM Web Interface - Application Components
78-4021139-01 Rev D
249
Parameter
Description
AdminState
The state of the offered program. The state InService
indicates the program is available for use by clients. The
state OutOfService indicates the program is not available.
A request for a program in the OutOfService state is
denied, and the EventLog entry will state
RC=ProgramOutOfService, which corresponds to the
CCMIS response code
rspBcProgramOutOfService(0x0006). The Terminate state
causes the server to force all users (i.e., tuners) away
from the program by displaying a "channel not available"
banner on the set-top box. After the users are moved
away from the program, the state is set to OutOfService.
The NotReady state is a transition state used by the SDV
Manager. When the SDV Manager is provisioning the
offered program, the state is set to NotReady during the
provisioning.
AudioEnc
The Audio encoding format of the program. The
supported audio formats are AC3, AAC and MP3.
VideoEnc
The Video encoding format of the program. The
supported video formats are MPEG2, H264 and VC1.
CaSysId
The conditional access encoding of the program.
DestAddr
The multicast destination address of the program.
Programs are presented to the input of the edge device.
The DestAddr is one of the parameters used to configure
the edge device to transmit the program.
SrcAddr1
The first of three source addresses for the offered
program. At least one source must be defined. The
IGMPv3 protocol supports source-specific configuration.
Multiple sources can be defined for the stream. An
IGMPv3 compatible device will use one of the available
sources and will switch to an alternate source if a source
disappears.
SrcAddr2
The second of three source addresses for the offered
program.
SrcAddr3
The third of three source addresses for the offered
program.
InProgNum
The offered program is presented to the edge device
typically as a SPTS or MPTS (typically SPTS) stream. This
parameter selects the program number in the SPTS or
MPTS stream.
Default: 1
Default: 1