Cisco Model 6109 6 MHz Off-Air Reference (NTSC) Guide De Montage
Chapter 3 USRM Web Interface
270
78-4021139-01 Rev D
Parameter
Description
AdminState
The availability state of the service group. When the state
is OutOfService, requests from a client are denied with
response code InvalidSG (0x8001). The InService state is
the normal state. The Release state causes the server to
release all of the sessions in the service group and force
all users (i.e. tuners) away from the program by
displaying a "channel not available" banner on the set-top
box. After the users are moved away from the program,
the state is set to OutOfService. The Delete state is used
to manually delete the QAM resource from the service
group. The NotReady state indicates the SDV Manager is
provisioning the service group and the group is not yet
ready for use.
Note: All sessions should be released prior to deleting
Note: All sessions should be released prior to deleting
the service group. Failure to release sessions may cause
some sessions to be stranded. Also, deleting a service
group in SdvSm does not delete the service group from
ResourceManager. When ResourceManager and SdvSm
automatically synchronize, the service group will be
recreated in SdvSm.
Zone
Zone number/index in the Program Zones table.
Note: Zone 0 means zone disabled. Uses SDV programs
Note: Zone 0 means zone disabled. Uses SDV programs
in SdvSm - Offered Progs page.
MinActiveBandwidth (Mbps) The service group specific minimum active bandwidth.
At least this amount of switched programs will always be
active.
Note: If set to 0, the
Note: If set to 0, the
SdvSm.Configuration.MinActiveBandwidth setting will
be used.
MaxActiveBandwidth (Mbps) The service group specific maximum active bandwidth.
The software will attempt to keep the switched
bandwidth below this threshold at all times.
Note: If set to 0, the
Note: If set to 0, the
SdvSm.Configuration.MaxActiveBandwidth setting will
be used.
STBCapacityStatus
The current status of STB capacity, either OK or Full. If
not OK, an alarm is indicated in the
STBCapacityThreshStatus parameter field.
STBCapacityExhausted
Indicates when the STB repository is exhausted and
cannot accept more STB assignments. Either OK or
Alarm (once capacity is reached).