Cisco Model 6109 6 MHz Off-Air Reference (NTSC) Guide De Montage
Chapter 5 Advanced Operations
390
78-4021139-01 Rev D
CreateRfgw_Servername.txt
initial creation of RFGW on the USRM
the USRM reads the RFGW-1 settings (freq, tsid, card status)
service groups are not provisioned at this time
Servername is the name or IP address of the USRM
PreprovisionRfgw_Servername.txt
provisions the RFGW-1 with service group information
the QAM is in AdminState=OutOfService, so the USRM will not use it
final check of QAMs before deleting GQAMs and turning up service
Servername is the name or IP address of the USRM
Qams_Servername.txt
sets the pre-provisioned QAMs to InService
Sessions now build, QAMs are active
Servername is the name or IP address of the USRM
Gqams2Remove_Servername.txt
The following is an example configuration file that removes QAMs named GQAM01
The following is an example configuration file that removes QAMs named GQAM01
and GQAM02. This file can be used as a template to create this type file for any
number of QAMs by substituting or adding your actual QAM names.
object GQAM01
adminstate=release
adminstate=delete
object GQAM02
adminstate=release
adminstate=delete
CreateRfgw_Servername.txt
The following is an example configuration file that creates two RFGW-1 QAMs
The following is an example configuration file that creates two RFGW-1 QAMs
named RFGW1-1 and RFGW1-2. This file can be used as a template to create this
type file for any number of QAMs by substituting or adding your actual QAM
names.
create Rfgw1 RFGW1-1
CtrlIpAddress=172.16.4.8
create Rfgw1 RFGW1-2
CtrlIpAddress=172.16.4.9